48V 200Ah 10kwh Lithium Phosphate Battery ESS Household Community

10kWh Power Bank 51.2V 100Ah LiFePO4 Li-ion Battery with Built-in BMS

Features of 51.2V 100Ah 10kwh Powerwall Battery

♦ Longer Cycle Life

Offers up to 20 times longer cycle life and five times longer float/calendar life than lead acid battery , helping to minimize replacement cost and reduce total cost of ownership
♦ Lighter Weight

About 40% of the weight of a comparable lead acid battery . A " drop in" replacement for lead acid batteries
♦ Higher Power

Delivers twice power of lead acid battery ,even high discharge rate, while maintaining high energy capacity

♦ Wider Temperature Range

-20ºC~60ºC
♦ Superior Safety

Lithium Iron Phosphate chemistry eleminates the risk of explosion or combustion due to high impact overcharging or short circuit situation

Parameters of 48V 400Ah LiFePO4 Battery

Battery Appearance

51.2V 200Ah 10kWh Powerwall System Application Introduction

Under the condition of good illumination in the daytime, the DC power from PV panel is changed into AC through inverter to supply power for household load. If the household load cannot run out of photovoltaic power, the remaining power will be stored in the battery. If the battery is full, photovoltaic power will be supplied to the grid. In the night or rainy days, photovoltaic cannot generate electricity. The battery supplies power to the home load through an inverter. If the battery is low, the household load will take power from the grid.

1. PV Self-use Surplus Power to Grid

Under the condition of good illumination in the daytime, the DC power from PV panel is changed into AC through inverter to supply power for household load. If the household load cannot run out of photovoltaic power, the remaining power will be stored in the battery. If the battery is full, photovoltaic power will be supplied to the grid. In the night or rainy days, photovoltaic cannot generate electricity. The battery supplies power to the home load through an inverter. If the battery is low, the household load will take power from the grid.

2. Peak Shaving and Valley Filling

In some countries and regions where peak valley time of use price is implemented, if the difference between peak price and low price is large, the application mode of peak shaving and valley filling can be adopted in energy storage system. In the low electricity price period, the energy storage system is charged; in the peak period of electricity price, the energy storage system supplies power to the household load. It can avoid users using too much power grid when the electricity price is high, and save energy expenditure.

3. Standby Power Supply

In some extreme weather (such as tornadoes, typhoons, hail), or substation operation failure, power supply will be interrupted. If the energy storage system is installed, the user can still enjoy sufficient power guarantee in this case.

Battery Testing

1. Waterproof test on lithium battery

Elite LiFePO4 batteries are widely used in marine, like the Yachts, Fishing Boats, Sailing boats, Kayak, Catamaran, etc.

Elite including special processing on lithium battery production crafts to meet the requirements of IP standard in different installation and operating environments. If you want a waterproof lithium battery, we are very pleased to provide you, please let us know your requirements.

2. Analog Car Vibration Test of Lithium Battery
To ensure the safety of our lithium batteries, we not only had many electric tests but also had a series of environmental tests, including the Analog Car Vibration Test.

Test Result: Elite LiFePO4 is suited to all the above road conditions, not only with stable performance but also safe and secure.

3. Nail Penetration Test
The Elite LiFePO4 battery pack is penetrated by two nails, after 6 minutes, there is no fire, no explosion during the whole testing process.

The stable chemistry of the lifepo4 lithium-ion battery proofs to be outstanding safe for use even in an extremely tough operating environment.

4. Drop Test
Elite 24V 200Ah LiFePO4 lithium-ion battery pack weight is 53kgs. it is dropped from 50 meters height at 120km/h speed. No fire, no explosion.

Why Choose US:

1. We offer one-stop power solutions, which saves design time and cost for customer:
-- Pack design / External Case design / BMS design

2. Strict quality control system which enhances customers' competitiveness:
-- 100% PCM test by IQC
-- 100% Capacity test by OQC

3. Delivery on time & excellent service:
-- Fast Delivery in 10 days if stock
-- 8h response & 48h solution

4. Experienced R&D team, be customer's professional power solution consultant:
-- Comprehensive Battery Test Center (Safety and Reliable test)
-- Powerful ODM Ability to Afford Customized Design Requirement

Shenzhen Elite New Energy Co., Ltd. is a high-tech enterprise specialized in the R&D, production of LiFePO4 battery systems for EV, ESS, lead acid battery replacement and many other different applications.

Shenzhen Elite New Energy is committed to provide customers with safe and durable green energy products, including EV power battery systems, portable energy storage, home energy storage, micro power grid, battery solutions for telecom station power supply, UPS, solar street lights, and battery packs for police car, harvesters, AGV, forklift, balance vehicles, electric tricycles, wheelchairs, etc.